Flow Plugin for OpenCode

opencode-plugin-flow adds a resumable planning, execution, validation, and review workflow to OpenCode. Use it when a task is important enough that you want a plan, recorded validation evidence, review gates, and a clear way to resume later.

Flow is skills-first: four hand-authored skills carry the workflow guidance, and a small plugin provides durable .flow/** session state plus a few hard, code-enforced invariants.

Quick start

Install Flow, open OpenCode in the project you want to work on, then run:

/flow-auto <your goal>

Common examples:

/flow-auto Add CSV export to the reports page
/flow-plan Refactor the authentication middleware
/flow-review Review this repository for release risks
/flow-status

Flow creates a tracked session under .flow/**, drafts a plan, executes one feature at a time, records validation evidence, reviews, and either continues, recovers, or stops with a concrete blocker.

Install

Add Flow to the plugin array in your opencode.json (global ~/.config/opencode/opencode.json or per-project):

{
  "plugin": ["opencode-plugin-flow@3.3.4"]
}

OpenCode installs the package from npm on the first startup and caches it per spec string under ~/.cache/opencode/packages/<spec>/ — it does not re-resolve the version on later startups. Pin an exact version and bump the pin to upgrade: a changed spec string installs fresh. See Updating below.

On startup the plugin syncs its global skills, commands, and review agent into OpenCode's normal discovery paths:

~/.config/opencode/skills/flow/SKILL.md          # driving loop
~/.config/opencode/skills/flow-plan/SKILL.md     # decomposition heuristics
~/.config/opencode/skills/flow-run/SKILL.md      # validation discipline
~/.config/opencode/skills/flow-review/SKILL.md   # review rubric
~/.config/opencode/commands/flow-auto.md         # slash command pointers
~/.config/opencode/agents/flow-reviewer.md       # read-only review agent

Restart OpenCode once after the first install or after an update so freshly synced skills, commands, and agents are discovered.

Sync is ownership-aware: each Flow-owned skill folder carries a .flow-skill-version marker with a sha256 line per shipped file, and each synced command/agent file has a sidecar .flow-version marker. Folders or files without Flow markers are never touched, and if you edit a Flow-owned file by hand the previous content is backed up next to it before an update replaces it.

Updating

OpenCode never auto-updates plugins: the cached install for a given spec string is reused as-is on every startup. Flow therefore checks npm in the background after startup and logs a one-line notice when a newer release exists — it only notifies and never edits your opencode.json. Set FLOW_DISABLE_UPDATE_CHECK=1 to turn the check off.

To update with an exact pin (recommended):

1. Change the pin in opencode.json to the new version (same form as the install snippet above).
2. Restart OpenCode once to install the new version, and a second time so the freshly re-synced skills, commands, and agents are discovered.

If you pinned a range like @3 instead, the spec string never changes, so the cache entry must be cleared by hand before restarting:

rm -rf ~/.cache/opencode/packages/opencode-plugin-flow@3

/flow-status shows the running plugin version in its install check, so you can always confirm which version OpenCode actually loaded.

Per-project skill overrides

Skills are plain markdown and deliberately overridable. To customize Flow's behavior for one project — for example a team-specific planning or review rubric — place a project-local skill at:

.opencode/skills/flow-plan/SKILL.md

OpenCode's project skill takes precedence over the global one. This is a supported feature, not a hack: edit the global synced copy for personal defaults (it will be backed up on update), or commit a project override for team conventions.

Upgrading from the pre-npm (curl) install

Releases before 2.1.0 installed a bundled plugin file at ~/.config/opencode/plugins/flow.js. Once you add the npm plugin entry, that copy would load Flow twice — the plugin warns about this at startup. Remove it with the uninstall command below.

Uninstall

bunx opencode-plugin-flow uninstall

This removes the Flow-owned global skill folders, command files, agent files, and a pre-npm flow.js copy if one exists, then reminds you to remove "opencode-plugin-flow" from the plugin array in opencode.json. Files you created yourself are never deleted. Use --dry-run to preview.

Skills, commands, and tools

The four skills

Deeper methodology (worked plan examples, validation and review rubrics) lives in references/ files next to the flow-plan, flow-run, and flow-review skills and is loaded only when needed.

Commands

Commands are thin pointers into the skills — the skill content is the real instruction surface.

These five are the whole command surface since v3.1. The v2/v3.0 convenience commands (/flow-doctor, /flow-history, /flow-session, /flow-reset) were retired: each was a thin wrapper over a single tool call that works as a plain request — "show the flow history", "close this session as completed", "reset feature X" — and /flow-doctor duplicated /flow-status. Startup sync removes the retired command files from earlier installs (user-edited copies are kept).

Tools

The plugin registers a small tool surface (7 tools) that owns all .flow/** mutations:

These seven tools are the whole registered surface — the v2 tool-name redirect stubs that shipped in 3.0 were removed in v3.1 as scheduled. Existing v2 sessions still migrate seamlessly (the session schema is unchanged).

Agents

Flow ships one dedicated subagent: flow-reviewer, a read-only reviewer used for fresh-context review passes. Its read-only boundary is enforced by OpenCode's native per-agent permissions, not by prompt text. Everything else runs in your normal agent, guided by the skills.

What the plugin enforces vs. what skills guide

The plugin code enforces only binary runtime gates and persistence safety:

1. Completion payloads must carry recorded passing validation evidence. Non-final features require validationScope: "targeted"; the feature that completes the session requires validationScope: "broad".
2. Completion payloads must carry a passing featureReview. The final completion payload must also carry a passing finalReview whose reviewDepth matches the plan's deliveryPolicy.finalReviewPolicy.
3. A session cannot close as completed with unfinished target work.
4. An approved plan cannot be mutated without an explicit reset.
5. If the session's review policy is strict, a recorded approved reviewer decision is required before completion.

Plus: atomic, locked, path-safe writes under .flow/**; schema validation of all tool payloads; and the compaction hook that keeps Flow state intact when OpenCode compacts a long session.

Everything judgment-shaped — how to decompose a plan, how deep to review, what counts as good evidence, when to stop and ask — lives in the skills, where you can read and override it.

What Flow writes

Flow stores workflow state in the project/worktree where OpenCode is running:

.flow/active/<session-id>/session.json        # active session (source of truth)
.flow/active/<session-id>/docs/**             # readable derived views
.flow/stored/<session-id>/session.json        # parked resumable sessions
.flow/completed/<session-id>-<timestamp>/**   # closed session history
.flow/locks/

The JSON session files are the source of truth; markdown files are derived views. There is one active session per worktree — activating another parks the current one under .flow/stored/**.

Flow refuses to write session state at filesystem roots or directly in $HOME, and asks before writing .flow/** under unusual workspace roots. Existing v2 sessions resume under v3 (the session schema is unchanged).

Troubleshooting

/flow-status

shows the workspace readiness checks (skills in sync, no stale pre-npm copy, workspace writable) with remediation steps, plus the active session state, the current blocker, and the suggested next step.

OpenCode references

• Plugins: https://opencode.ai/docs/plugins
• Skills: https://opencode.ai/docs/skills
• Agents: https://opencode.ai/docs/agents

Releases

Release notes live in CHANGELOG.md and under docs/releases/.

Working on Flow itself

• Development guide: docs/development.md
• Maintainer contract: docs/maintainer-contract.md
• Codebase map: docs/contributor-map.md

Package API boundary

opencode-plugin-flow supports root-only imports:

import flowPlugin from "opencode-plugin-flow";

Deep imports such as opencode-plugin-flow/dist/... are intentionally not exported.

License

MIT. See LICENSE for the full text.