Package Exports

pi-ip

This package does not declare an exports field, so the exports above have been automatically detected and optimized by JSPM instead. If any package subpath is missing, it is recommended to post an issue to the original package (pi-ip) to support the "exports" field. If that is not possible, create a JSPM override to customize the exports field for this package.

Readme

pi-ip

What Is This?

pi-ip is a global node module for installing on your Raspberry Pi, so that when it starts up it will report it's IP address in a cloud hosted Firebase database of your choosing.

Additionally, this module supports being installed on multiple Raspberry Pi's, all with differently configured names. All of the Pi IP addresses will be available in the same Firebase database.

Setup

Install & Configure pi-ip

Login to your raspberry pi
Install pi-ip: npm install -g pi-ip
Configure pi-ip: pi-ip config
Test it out: pi-ip

You should see something like the following

Network Interfaces:
{ lo: 
   [ { address: '127.0.0.1',
       netmask: '255.0.0.0',
       family: 'IPv4',
       mac: '00:00:00:00:00:00',
       internal: true } ],
  eth0: 
   [ { address: '192.168.1.124',
       netmask: '255.255.255.0',
       family: 'IPv4',
       mac: 'b8:27:eb:2f:a2:19',
       internal: false } ] }
IP eth0: 192.168.1.124
IP wlan0: disconnected

Setup to Run on Startup

Create an init.d run script /etc/init.d/pi-ip.sh with the following contents:
```
#!/bin/bash
pi-ip
```
Make sure the pi-ip.sh script is executable: sudo chmod ugoa+rx /etc/init.d/pi-ip.sh
Set the script to run on startup: sudo update-rc.d pi-ip.sh defaults
Reboot your pi: sudo reboot

Future

Wireless Network Configuration stored in Firebase, and setup on the PI upon bootup using a wired connection, then auto reboot.